WA3SFJ Repeater System
A repeater receives on one frequency and retransmits on another, allowing local operators with handhelds and mobile radios to communicate over a wider area than simplex usually permits.
Program and use the system correctly
Correct frequencies, offsets, tones, identification, and operating courtesy keep a shared repeater useful.
Two frequencies
A repeater listens on its input and transmits on its output. Your radio must be programmed for the correct offset.
Tone squelch
A CTCSS/PL tone helps prevent unintended access and reduces nuisance key-ups.
Shared system
Listen first, identify clearly, leave pauses, and remember that linked systems may carry audio farther than expected.
Basic repeater signal path
Your signal moves from the radio to the receiver and controller, then returns through the repeater transmitter.
User radio
Your radio transmits on the repeater input frequency with the correct tone.
Receiver
The repeater receiver hears your signal and passes audio to the controller.
Controller
The controller manages timing, IDs, linking, courtesy tones, and transmitter control.
Transmitter
The repeater retransmits your audio on the output frequency for others to hear.
WA3SFJ repeater access
These are the public operating details carried forward from the club’s WA3SFJ source material. Program your radio carefully and check the club calendar or announcements for any temporary changes.
Listen to WA3SFJ live
No license is required to listen. Select Play on an available receiver; silence may simply mean the repeater is idle.
Powered by VSS Business SolutionsVHF repeater
Receive: 146.850 MHz
Transmit: 146.250 MHz
Offset: -0.600 MHz
PL tone: 107.2 Hz
UHF repeater
Receive: 449.825 MHz
Transmit: 444.825 MHz
Offset: -5.000 MHz
PL tone: 167.9 Hz
Linked access and operating notes
AllStar: 558300
EchoLink: WA3SFJ-R / 585690
Use normal repeater courtesy: listen first, identify with your callsign, leave room between transmissions, and keep conversations clear for all operators.
GMRS repeater information
This GMRS information is current user-supplied data for the site, not old WA3SFJ website source material. GMRS is a separate FCC radio service from amateur radio, so operators must follow the applicable GMRS rules and license requirements.
GMRS repeater
Frequencies: 462.700 Tx / 467.700 RX
PL tone: 107.2 Hz
Callsign: WQYM714
Keep services separate
Amateur-radio repeaters use amateur licenses and Part 97 operating rules. GMRS repeaters use GMRS licensing and rules. Do not assume the same radio, call sign, or operating privilege applies to both services.
Verify settings and report conditions
Confirm programming, listen to the audio, and include location and equipment details in coverage reports.
Verify first
Confirm frequency, offset, tone, and call sign before sharing settings or programming radios.
Listen locally
Check for distorted, weak, noisy, or clipped audio before assuming a coverage problem.
Record location
Coverage reports are useful only when the location, radio, antenna, and conditions are recorded.
Program and test carefully
Use the quick-start settings, listen first, identify properly, and ask for help if offset, tone, linked access, or GMRS-versus-amateur settings are unclear.